FRAMOS does not support this type of connection. The reason for not supporting cross-subnet GigE communication is two-fold:

• GigE Vision traffic places a large load on a network, which can cause problems for everything else connected to that network.
• GigE Vision traffic is transmitted in large chunks that are much easier to transmit with less traffic on the network.

As such, each camera should be connected directly to a computer with nothing else connected to that network port, and the camera and computer's network card should be in the same subnet. If multiple cameras are being used, select a unique subnet for each set of camera and network adapter. This is the expected use setup for FRAMOS D435e with GigE.